Follow Us


Vib Meter 320 - Vibration Analyzer

Vib Meter 320 - Vibration Analyzer

For sales please contact: 



Office: +44 (0) 1293 530196 




  1. Product Overview
  2. Features
  3. >Benefits
  4. Specifications
  5. Accessories
  6. Demo

Product Overview

The Vib Meter 320 - vibration analyser is the entry level CBM tool from C-Cubed.  But don't be fooled! - one press of a button and the Vib Meter 320 displays a colour coded ISO reading in mm/s and shows the bearing damage.  For more advanced users there's even an 800 line spectrum with cursor as well as alarms for unbalance, misalignment and looseness.

We are confident that this is the most advanced and easy to use vibration analyser at this price.


  • Overall vibration values are displayed with colour coded alarm levels for ISO values and bearing condition.
  • Colour coded frequency band alarms based on run speed can be displayed to diagnose machine faults such as unbalance, misalignment and looseness.
  • The Vib Meter 320 represents the very latest in technology with up to 800 lines of FFT resolution and fully zoom-able vibration spectrum display.
  • The fully dynamic cursor displays frequency and amplitude values.
  • Readings are easily saved and recalled, and all alarm levels and settings are stored in non-volatile flash memory.
  • Run speed and machine type are entered with the simple to use Setup Wizard.
  • Built-in accelerometer.


  • Simple to use - requires no training.
  • Colour coded readings based on international alarm levels.
  • Diagnoses bearing wear and machine run-speed faults (unbalance, misalignment and looseness).
  • Fully zoomable frequency spectrum with dynamic cursor, for viewing/measuring vibration frequencies.



200 mm x 60mm x 26mm


280g (not including magnet)



Water, Sand & Dust:

IP67 Waterproof


0ºC to 50ºC


-20ºC to 70ºC

Power supply

2 x AA batteries

Battery life

Auto power OFF - typically 50 hours operating time depending on brightness setting.

Frequency range

2/10 Hz to 1 kHz (ISO)

1 kHz to 10 kHz (BDU)

Max frequency resolution

1.25 Hz @ 800 lines FFT setting

Displayed Vibration Amplitude Units

Acceleration in g

Velocity in mm/s (or inches/s)

Bearing noise in BDU (bearing damage units)

Displayed Frequency Units

Hertz (Hz), RPM or CPM

Input range

+/- 50g

Dynamic range

72 dB (0.05g resolution)

VA diagnostic bands

(RPM = run speed)

Unbalance 1x RPM

Misalignment 2x RPM

Looseness 3x RPM


· Screw in probe tip (1/4” UNF 28)

· Nylon carrying case


· Accelerometer mounting magnet

· Extended probe tip (stinger)


  • Extended probe tip (stinger)
  • Mounting magnet probe tip

Vib-Meter-320-Vibration-Analyzer-CBMThese are some typical screens that the user might see when using the unit.